D-Link DES-3225G - Manual (Page 89)

24-port NWay Ethernet Switch User’s Guide
Using the Console Interface 79
Figure 6-50. Ping Test screen
After filling in the fields above, press START to initiate the Ping test.
The fields you can set are:
♦ Destination IP Address The IP address of the device to be Pinged.
♦ Repetitions Amount of times the Switch should send the Ping (1-255). If zero is chosen, the Switch will continue
Pinging indefinitely.
In the lower part of the Ping Test screen, you can view the Ping status, including Result, Reply, Time out, and
Unreachable.
Save Settings to TFTP Server
Choose Save Settings to TFTP Server from the Utilities menu (under System Utilities on the main menu) to
access the following screen: