Canon XLH1 - Manual (Page 47)

47
Recording
E
End Search
You can use this function to locate the end of the last recorded scene.
Press the END SEARCH button.
• “ ” appears.
• The camcorder rewinds/fast forwards the tape, plays back the last few seconds of the recording and stops
the tape.
• Pressing the button again cancels the search.
 End search cannot be used once you unload the cassette.
 End search may not work properly if there is a blank section between recordings on the tape.
 The end search function may not work correctly if you mix recordings in HDV and DV standards on
the same tape.
END SEARCH button