Canon XLH1 - Manual (Page 94)

94
Playback Playing Back a Tape
Select a playback standard according to the tape you wish to play back.
1. Set the POWER dial to .
2. Open the menu and select [SIGNAL SETUP]. Select [PLAYBACK STD] and set it to
[AUTO], [HDV] or [DV] to match the tape you wish to playback.
3. Close the menu.
Special Playback Modes
(Playback Pause)
To pause playback, press the button on the camcorder or the PAUSE button on the wireless controller
during normal playback.
(Rewind Playback) / (Fast Forward Playback)
Press down and hold the or button on the camcorder or the REW or FF button on the
wireless controller during normal playback, rewind or fast forward to enter the fast playback at 8x the normal
playback speed.
(Reverse Playback)
Press the button on the wireless controller during normal playback. Press the (play) button to return
to normal playback.
If the playback picture is distorted, clean the video heads using a Canon Head Cleaning Cassette or a
commercially available digital video head-cleaning cassette (
135).
REC SEARCH
+/– buttons
HDV