Leprecon Watson - Manual (Page 10)

10
Delay Menu
The Non-Dim and Auto switch modes use a delay time to prevent immediate power
switching. This can be useful in two situations:
1) Momentary signal loss or accidental changes will not turn off fixtures.
2) Device turn on can be delayed to sequence power on for multiple units. This can
minimize the disturbance on the power system.
From the main menu, press the Menu button twice. The Delay menu is indicated by the
first two display characters Dl.
Delay times are represented in seconds, and can be set from 01 to 99 seconds.
Dl:01
Dl:99