Leprecon Watson - Manual (Page 7)

7
5) Front Panel Controls
Watson uses a 4 digit display and four entry switches to set operating modes, and show
the operating status.
Address Menu:
When the unit is first turned on, the display shows the DMX address. This is the DMX
address that can be used to turn loads on and off
When there is no DMX input, the address number is preceded by a dash ( - ).
When valid DMX is detected, the dash is replaced with the letter ‘d’ for DMX:
The UP/DOWN keys change the value for the start address. Watson uses the changed
value immediately and permanently saves it after 10 seconds or if the Enter or Menu key
is pressed.
d.001
-.001