Leprecon Watson - Manual (Page 4)

4
1) Introduction
Watson provides two important functions to support new technology (non-incandescent)
lighting fixtures.
1) Power Switching – using a set DMX address, or simply detecting DMX signal,
Watson will turn off the power to fixtures when they are not in use.
2) Isolated DMX data – Watson provides optically isolated and buffered signal for a
series of DMX fixtures.
Please take a few minutes to review the specifications features of the new Watson
product.
2) Features and Specifications
Power Connection
Power input Connector Neutrik PowerCon
Mating connector Neutrik NAC3FCA
Operating voltage 110 – 240 VAC
Maximum load current 15 amps
Ambient Temperature
Watson Power Management systems are designed to operate in an environment where
the ambient temperature is less than 40 degrees Celsius, or 104 degrees Fahrenheit.
Load Connector
Depending on the model purchased, your Watson Power System will use either
Powercon or standard NEMA 5-15 load connectors. Please note that Powercon
connectors are NOT designed to be connected under load. Please turn off the circuit
breaker on Watson before connecting power or load. PowerCON load connector is
Neutrik NAC3MPB-1, and the mating cable mount connector is NAC3FCB.