Leprecon ULD-360DMX - Manual (Page 12)

- 12 -
Status Menu
When the ULD-360 is in the Channel mode, pressing ‘MENU’ again will start the Status
mode. When Status mode starts, the state of each channel will be shown in sequence,
with the display cycling from Channel 1 to Channel 6, then automatically cycle back to
channel 1. This automatic cycling is indicated by the flashing colon.
The Status Mode first displays the current input state of the dimmer channels 1-6. If
valid DMX is present, the letter ‘d’ is displayed, followed by the DMX value for the
channel:
If there is no DMX present, the ‘d’ letter will disappear, and a ‘-‘ will be shown
instead:
d1:00
-1:00