Leprecon ULD-360DMX - Manual (Page 14)

- 14 -
Configuration Data
If you press the Menu button while in the status display, various factory configuration
data will be seen. These features are not fully defined at this point, but include software
version, power configuration, and analog calibration data for the microprocessor.
6) Error conditions
The ULD-360 will protect itself if the line voltage or operating temperature exceeds safe
limits. In these cases, the dimmer will turn off all channels, and display an error
message on the display:
Error 01 is displayed for an overtemperature condition.
Error 02 is displayed for an overvoltage condition.
The dimmer will return to normal operation once the fault is corrected.
NOTE: Extended operation with Overvoltage applied can cause damage to
the dimmer power supply.
Er:01