LSC Lighting TEKO - Manual (Page 10)

TEKO Dimmer
Operator Manual V3.0
5 Menu System
5.1 CONTROL PANEL OVERVIEW
The Control Panel of the TEKO dimmer contains
indicators for status and channel levels together
with the LCD touch screen user interface.
Operation of the touch screen and status of the
indicators are discussed in detail in this section.
5.1.1 Indicators
The indicators located around the touch screen
are multi coloured and light or flash to indicate
their current condition as described below;
TEKO STATUS
 Green = Normal operation.
 Red (flashing) = Alarm. See status
message on LCD screen.
 Red (steady) = Alarm is acknowledged but
the problem still exists.
DMX
 Green = Valid DMX control signal
connected.
 Green (flashing) = Loss of DMX control
signal.
 Red (flashing) = Error on DMX control
signal.
LSCnet
 Green = Valid LSCnet control signal
connected (from ePlates).
 Green (flashing) = Data traffic detected on
LSCnet.
CHANNEL LEVEL Indicators
 Green = The channel is ON via DMX
control.
 Red = The channel is ON via memory
(ePlate) or channel test control.
The brightness of the channel indicator is
proportional to the channel level.
See the,
Alarms section for further details on
alarms.
5.1.2 Touch Screen
The touch screen may be operated by touching
the virtual buttons with your finger. The home
page of the touch screen shows the current level
of each dimmer channel in a bar graph display.
If the TEKO has been “locked”, the [Menu]
button is replaced by the [Unlock] button.
Touching the [Unlock] button and entering your
code number unlocks the TEKO and reveals the
[Menu] button.
Pressing [Menu] allows you to access a range of
functions, setups and tests via sub-menus. Each
sub-menu screen has help information in the top
left corner. The menus are fully described in
Section 3 “Testing and Setting up the TEKO
Dimmer”.
Termination status
indicators
DMX Remote
TEKO status
indicator
Control status
indicator
LSCnet Remote
Control status
indicator
LCD Touch screen
Channel level
indicators 1 to 12
Green =DMX control
Red =Mem control
TEKO Control Panel
LSC Lighting Systems (Aust) Pty. Ltd Page 8