LSC Lighting ISOnode - Manual (Page 3)

LSC Lighting Systems (Aust) Pty Ltd Page 2
ISOseries Installation guide
1.0 Introduction
The DNA (Distributed Network Advantage) system is a collection of components that are
interconnected to provide a versatile DMX512 distributed network. The ISOseries of
products are part of the DNA system and consist of the following devices:
Isopower – A 2RU rackmounted or wall mounted power source that supplies +24VDC power
to the ISOPORT and ISONODE network products. The rackmount unit can power upto 32
ISOPORT/ISONODE modules where the wall mount unit will power upto 12
ISOPORT/ISONODE modules. The rackmount unit has integrated front panel indicators that
display operational status.
ISOPORT – A wall mounted DMX512 data outlet that is electrically isolated and buffered, with
integrated Power and DMX data indicators. The ISOPORT is available with one, two or three
XLR 5 pin output ports where each output port can drive upto 32 DMX512 devices. Input to
output relationships and end of line termination can also be configured during installation.
The ISOPORT is powered from a 24VDC nominal power supply
.
ISONODE – A wall mounted DMX512 data inlet that is electrically isolated and buffered, with
integrated Power, upstream data and input data indicators. The ISONODE has a XLR 5 pin
input connector that senses when a transmitting device has been connected and disconnects
the upstream DMX512 data, allowing the transmitting source to control all devices connected
downstream. If the transmitting source is removed or simply stops sending data, the
ISONODE will automatically reconnect the upstream data to all devices downstream and
restore network communication. The ISONODE is powered from a 24VDC nominal
power
supply.
Isopower rack mount
ISPR
Isopower wall mount
ISPW
Series 1 Series 2
Series 3