Lumens Technology Ladibug 3.0 - Manual (Page 11)

10
5.3. Use the image sharing server to connect to the computer and camera
Complete image sharing settings for the camera before implementing this method

Equipment requirements
 Two computers with Internet access
 One camera
5.3.1. Turn on the image sharing function
Connect one of the computers to the camera using a USB cable and turn on the image
sharing function according to the following instructions:
To connect using a USB cable, please refer to
5.1 Use the USB cable to connect the
camera to the computer
 Click to switch to the function settings page.
 Click [Share Image] to activate image sharing.
[Remark] Take note of the server address for image sharing, manually input the address
on computers with different network segments to connect.
▼Windows interface
▼MAC interface
Turn image sharing on/off
server address for image
sharing
Turn image sharing on/off
server address for image
sharing