Q-See Computer Hardware - Manual (Page 35)

SuperDVR & H.264 Series Cards
User Manual
Error! Use the Home tab to apply
标题 1 to the text that you want to
appear here. Error! Use the Home
tab to apply
标题 1 to the text that
you want to appear here.
35
4.5.2 Alarm Record
Figure4-10 Alarm Trigger Method Configuration
Every sensor can trigger multiple channels to record. For example, if users
select CAM1, CAM4 and CAM5 for Sensor2, then once the sensor is
activated, CAM1, CAM4 and CAM5 will begin to record. Users can also select
the voltage, high and low, for alarm signals.
4.5.3 Alarm Output
Figure4-11 Alarm Output Configuration
Press in the main interface to access the following Alarm Configuration
area where users can setup a motion detection alarm, sensor alarm, and