Q-See Computer Hardware - Manual (Page 90)

Appendix1 Frequently Asked
Questions
SuperDVR & H.264 Series Cards
User Manual
90
Appendix1 Frequently
Asked Questions
Appendix 2.1 Installation
Appendix 2.1.1 Cannot Install the SuperDVR Driver
Possible causes:
• H.264 series capture card has not been installed. Before installing driver,
users should install capture card hardware in the PCI slot in the computer
case before installing the SuperDVR program.
• H.264 series capture card has not been installed correctly. Please unplug
the card and install it again or change to another PCI slot, preferably next to
the slot it was originally installed in.
• The card is not compatible with the PC system.
Appendix 2.1.2 Can’t find H.264 series Devices in Device Manager
Enter the Device Manager and cannot find corresponding H.264 series
Devices, the possible cause may be:
• Windows system error. Restart computer.
• Problem with H.264 series card. Replace the card.
• Install SuperDVR to see if it finds card and installs the driver.
Appendix 2.2 How to Use SuperDVR
Appendix 2.2.1 Meanings of the indicator lights
• Grey- Normal state
• Red - Sensor alarm
• Yellow - Motion detection alarm
• Blue - Video loss
• Light Green - Manual record state
• Dark Green - Schedule record state
•
NOTICE: Users can refer to Figure3-6 to learn more.
Appendix 2.2.2 How do the different record modes work?
Users can set more than one record mode in Record setup (refer to
Figure3-5), but actually, there is only one valid record mode for recording.
The priority order of the recording modes is: Sensor Alarm Record > Motion
Detection Record > Manual Record > Schedule Record