Q-See Computer Hardware - Manual (Page 78)

Error! Use the Home tab to apply
标题 1 to the text that you want to
appear here.
Error! Use the Home
tab to apply
标题 1 to the text that
you want to appear here.
SuperDVR & H.264 Series Cards
User Manual
78
Users can use multiple cameras to record, every camera works separately
and recorded files are also saved separately.
a. Record quality
There are five quality options to select from: lowest, lower, medium, higher
and highest. The higher the record quality is, clearer the recorded image is
and the more hard space the recording takes up.
b. Manual record
By selecting this option, the selected camera image will be recorded and
saved all the time.
c. Schedule record
By selecting this option, the selected camera image will be recorded
according to the times you setup on the schedule.
d. Motion record
By selecting this option, users can set selected channels to record when there
is motion detected in front of the camera.
2. Storage disk
Fig 7.28 Storage disk
Users can store recorded files by selecting storage disk. By checking the
‘Recycle’check box, users can setup the software to continue recording after
the hard drive is full by recording over the oldest files on the hard drive.
By clicking , users can copy the setting of this channel to any other
selected channel.
7.5.6 Motion configuration
Click icon to access the motion configuration interface as shown below: