Quick start for using, Appendix 3.1 installation instructions, Launch windows – Q-See Computer Hardware User Manual

Page 96: Reboot computer once installation has completed, Appendix2

Advertising
background image

Appendix2

Quick Start for Using

SuperDVR & H.264 Series Cards

User Manual

96

Appendix 2.4.9 If system time must be changed, please do following
preparations first
1.

If new time is later than current computer time (for example, change

2006/01/01 0

:0:0 (current system time) to 2007/01/01 0:0:0 (target time)),

the change can be made directly.
2.

If new time is before the current computer time (for example, change

2007/01/01 0

:0:0 (current system time) to 2006/01/01 0:0:0 (target time)),

first stop the video recording, backup all video data. Turn off SuperDVR,
change computer time, and re-start SuperDVR.

Appendix 2.4.10 How to use REPAIRDB to repair SuperDVR database
Enter the installation directory of SuperDVR.

C:\ProgramFiles\SuperDVR\SuperDVR,open the REPAIRDB.EXE file. The
user ID is ‘SYSTEM’, and no password is needed to enter. After entering,
please select database to repair.

Appendix 2.4.11 How to set power options of Microsoft VISTA system
After installing VISTA system, you should enter the Start menu to choose
Control Panel’. Select ‘System and Maintenance’ link. And select ‘Power
option in ‘System and Maintenance’ window. Finally, Select the ‘High
Performance Change Plan Setting
’ option.

Appendix2

Quick Start

for Using

Appendix 3.1 Installation Instructions

STEP1

Insert the PCI card (But do not connect the Camera yet).

STEP2

Launch Windows.

STEP3

Windows will come up with Hardware wizard. Just click ‘Cancel’.

STEP4

Put the installation CD in the drive and open up SuperDVR folder

and run the ‘Setup’ file.

STEP5

Follow the steps and in WinXP, it will come up with a message

saying the program has not passed Windows logo testing, just select
‘Continue anyway’.

STEP6

Reboot computer once installation has completed.

For complete instructions, refer to Chapters 1-7.

Once Booted up, On Desktop there will be a ‘SuperDVR’ icon.

If this program recognizes the PCI card, program will open OK. Please log in
to the program.

Once your program is opened, now connect the Cameras.

Advertising