Marantz MCR503 - Manual (Page 17)

12
ENGLISH
Before playing a disc
1 Press ON/STANDBY .
2 Press [INPUT df] or <INPUT> to set the input source
to “DISC”.
If no disc is loaded “NO DISC” is displayed.
3 Insert a disc (vpage 3).
• Press 5 to open/close the disc tray.
• The disc tray also closes when 1
/ 3 is pressed.
NOTE
Do not place any foreign objects in the disc tray. Doing so could
damage it.
Turning the power off
Press ON/STANDBY .
NOTE
• Be sure to stop playback before turning the power off.
• Make sure that the disc tray is completely shut before turning off
the power.
• Do not push the disc tray in by hand when the power is turned off.
Doing so could damage the set.
1/ 3 5
ON/STANDBY VOLUME df <INPUT> <MODE>
<ENTER> u/i 8 / 9
ON/STANDBY
[MENU]
[TONE]
VOLUME df
[ENTER/MEMO]
[INPUT df]
[p]
[CLOCK]
5
13
i
u
8
[o]
9
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control [BUTTON]
Symbols used to indicate buttons in this guide
Basic operations
This section explains how to set the current time, and how to
playback a CD or tuner.
For other operations, see the sections below.
n MP3 and WMA fi les playback (vpage 21)
n iPod® playback (vpage 23)
n Portable audio player playback (vpage 24)
n USB memory device playback (vpage 25)
n Setting the timer (vpage 26)
n Setting the speakers (vpage 28)
Preparations
Turning the power on
Press ON/STANDBY .
The power turns on. Press again to set the power to standby.
NOTE
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time, either press
ON/STANDBY to turn off the power, or
unplug the power cord from the power outlet.
• Be sure to stop playback before turning the power off.
n Completely turning off the power
Unplug the power cord from the wall outlet.
• Note that the time setting is cleared when the power cord is
unplugged from the outlet.
• The settings made for the various functions may be cleared if the
power cord is left unplugged from a power outlet for an extended
period of time.
1.M-CR503N_ENG_4th_0610.indd 12 1.M-CR503N_ENG_4th_0610.indd 12 2010/06/11 18:24:16 2010/06/11 18:24:16