Tuner playback, Tuning in broadcast stations, Automatically presetting fm stations (auto preset) – Marantz MCR503 User Manual
Page 21
16
ENGLISH
Tuner playback
Tuning in Broadcast Stations
Connect the antenna beforehand (vpage 10).
1
Press
[TUNER]
.
• If the input source is set to something other than “TUNER”, press
[TUNER]
to switch the input source to “TUNER”.
2
Press
[TUNER]
or
<MODE>
to select the reception
band.
FM AUTO
FM MONO
AM
GAbout the displayH
When “FM AUTO” is selected ........ “AUTO” is displayed.
When “FM MONO” is selected ...... “MONO” is displayed.
When “AM” is selected .................. The reception mode is not
displayed.
3
Use
[TUNING –, TUNING +]
or
<ui>
to select the
reception band.
When a station is received, the “TUNED” indication will light.
The input source can also be switched to “TUNER” using
[INPUT df]
or
<INPUT>
.
n To tune automatically
Press and hold in
[TUNING –, TUNING +]
or
<ui>
to tune in
stations automatically.
• Stations whose signal is weak cannot be tuned in.
n To stop auto tuning
Press
[TUNING –, TUNING +]
or
<ui>
.
A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far from
the TV as possible.
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this guide
[ENTER/MEMO]
[p]
[CH-]
[NUMBER]
[CLEAR/DEL]
[CH+]
[RDS]
[MENU]
[TUNING-]
[TUNER]
[TUNING+]
2
i
[o]
u
[TIME/DISPLAY]
[INPUT df]
<MODE>
<ENTER>
2
8 / 9
<INPUT>
u/i
Automatically presetting FM stations
(Auto preset)
This unit can be preset with a total of 99, FM and AM broadcast
stations.
NOTE
Auto preset is not possible with AM broadcast stations.
n Auto presetting with the remote control
Perform this operation when tuned to an FM broadcast station.
1
Press
[MENU]
or press
<MODE>
for 3 or more
seconds.
2
Use
ui
to select “TUNER SETUP”, then press
[ENTER/MEMO]
,
[p]
or
<ENTER>
.
3
Use
ui
to select “FM AUTO PRESET”, then press
[ENTER/MEMO]
,
[p]
or
<ENTER>
.
4
Press
[ENTER/MEMO]
or
<ENTER>
while “PRESET
ENTER” is fl ashing.
Broadcast stations are preset automatically.
Canceling auto presetting
Press
[TUNER]
or
2
.
Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.
NOTE
When FM auto preset is performed, the channel currently registered
as the FM auto preset is deleted, and the newly preset FM broadcast
station is registered to the same number as the deleted channel.
1.M-CR503N_ENG_4th_0610.indd 16
1.M-CR503N_ENG_4th_0610.indd 16
2010/06/11 18:24:18
2010/06/11 18:24:18