Setting the sleep timer – Marantz MCR503 User Manual
Page 32
27
Getting Started
Basic Connections
Advanced Connections
Basic Operations
Advanced Operations
Advanced Operations
Troubleshooting
Explanation terms
Specifi
cations
Index
ENGLISH
10
Use
[o
p]
,
<MODE>
or
<INPUT>
to select “ON” or
“OFF” for the timer, then press
[ENTER/MEMO]
or
<ENTER>
.
• The
indicator lights
and the timer setting is
entered.
• The timer settings are
displayed for 3 seconds.
O N C E T I M E R
0
O N
1
E V E R Y D A Y O F F
O N C E T I M E R
O N
E V E R Y D A Y
0
O F F
1
11
Press
ON/STANDBY
to set the power to standby.
Timer standby mode is set, and the TIMER indicator lights red.
n Setting the timer to on or off
q
Press
[MENU]
or press
<MODE>
for 3 or more seconds.
w
Use
ui
to select “TIMER ON/OFF”, then press
[ENTER/
MEMO]
or
<ENTER>
.
e
Use
ui
to select “ONCE” or “EVERYDAY”.
r
Use
[o
p]
,
<MODE>
or
<INPUT>
to select “ON” or “OFF” for
the timer, then press
[ENTER/MEMO]
or
<ENTER>
. The timer
settings are displayed after this.
• When set to “OFF”, time operation is disabled, but the timer
settings remain unchanged.
n To check the timer settings
q
Press
[MENU]
or press
<MODE>
for 3 or more seconds.
w
Use
ui
to select “TIMER ON/OFF” , then press
[ENTER/
MEMO]
or
<ENTER>
.
e
When “ON” is displayed for the timer setting, press
[ENTER/
MEMO]
or
<ENTER>
.
The timer settings are displayed for 3 seconds.
n To change the timer settings
Perform the operations at “Setting the timer” (vpage 26).
n To change the setting while setting the timer
Press
[o]
or
<MODE>
.
The setting returns to the previous step. Display the setting you
want to change, then make the desired setting.
Setting the timer
Setting the sleep timer
Use this function to automatically switch the power to the standby
mode after a specifi c amount of time (minutes).
The sleep timer can be set to up to 90 minutes, in steps of 10 minutes.
Press
[SLEEP]
during playback and select the setting
time.
SLEEP 90 min
SLEEP 80 min
SLEEP 70 min
SLEEP 60 min
SLEEP 50 min
SLEEP 40 min
SLEEP 30 min
SLEEP 20 min
SLEEP 10 min
SLEEP OFF
• After about 5 seconds, the setting is entered and the display
returns to as it was before.
n Canceling the sleep timer
Either press
[SLEEP]
to select “SLEEP OFF” or press
ON/
STANDBY
.
n To check the time remaining until the sleep
timer is activated
Press
[SLEEP]
.
1.M-CR503N_ENG_4th_0610.indd 27
1.M-CR503N_ENG_4th_0610.indd 27
2010/06/11 18:24:22
2010/06/11 18:24:22