Main features, Connections/installation – Denon DN-D4500 User Manual

Page 7

Advertising
background image

7

ENGLISH

– TABLE OF CONTENTS –

z

Main features .....................................................7

x

Connections/Installation .....................................7

c

Part names and functions ..........................8 ~ 10

v

Compact discs ..................................................10

b

Basic operation...........................................10, 11

n

Pitch/Brake .......................................................11

2

ACCESSORIES

Check that the following parts are included in addition to the main unit:

q Operating instructions ........................................1
w Connection cords for signal output (RCA) ..........2
e Remote control unit (RC-D45) ............................1

m

Seamless loop/Hot start and Stutter ................12

,

MP3 Playback.............................................13, 14

.

Other functions.................................................14

⁄0

Memo .........................................................14, 15

⁄1

Preset ...............................................................15

⁄2

Specifications ...................................................16

r Remote control connection cable.......................1
t Service Station List .............................................1

1

MAIN FEATURES

The DN-D4500 is a double CD/MP3 player equipped
with a variety of functions and high performance
characteristics, specifically designed for Mobile and
Club DJ’s around the world.

Control section
1. The DN-D4500 can be easily mounted on a

standard 19-inch rack.

2. Improved visibility under low lighting

conditions thanks to a large fluorescent display,
back-lit illuminated action buttons and
illuminated disc trays.

3. Improved interface operation thanks to a large

jog/Shuttle wheel and track select knob.

Functions
1. Shockproof function protecting against external

vibrations

2. Auto Level Search / Instant Start
3. Pitch / Pitch Bend & Key Adjust
4. MP3 Playback

It is possible to play MP3 files created in the
specified format found on page 13.
Files can be searched for easily either manually, or
by scanning or using a number of file search
functions (File search, File/Folder search, Artist
name search, Title name search, File name search).

5. Seamless Loop

Playback can be looped between any two points in
a track without any break in the audio. Two loop
start points (A-1 and A-2) can be set anywhere
within the track or disc.

1

6. Hot Start / Stutter

Playback can be started instantaneously from
points A-1 and A-2.
In the stutter mode, these same buttons play
momentary audio while pressed and held down.

1

7. Brake

1

8. Relay Play

When this mode is set, CD1 and CD2 starts
playback alternately.
This unit can relay the playback of CD1 and CD2
every track or every disc.

1

9. Power on Play

The player can be set so that playback in the relay
mode starts when the power is turned on.

10. Fader Start

The DN-D4500 FADER START controls are
compatible with our DN-X400, DN-X500,
DN-X800, DN-X900 or DN-X1500 mixers.

11. Auto Disc Tray Close System
12. Preset functions - Different presets can be

changed according to your needs.

13. Custom Setting Memory
14. CD TEXT / MP3 ID3 Tag name display
15. CD-R / RW Playback

This player can play CD-R/RW discs, but only if
they are finalized.

Note:

However that depending on the
recording quality, the player may not be
able to play some finalized CD-R/RW
discs.

DN-D4500

Max. 10°

2

CONNECTIONS/INSTALLATION

1. Turn off the POWER switch.
2. Connect the RCA pin cords to the inputs on your

mixer.

3. Connect the control cord to the REMOTE connector

on the RC-D45.

CAUTION:
• Be sure to use the supplied control cord. Using

another type of cable may result in damage.

• Be sure the power is off when connecting the

control cord. Otherwise the units may not work
properly.

• Never connect any remote controllers other than

the RC-D45.
Doing so can damage the equipment.

The DN-D4500 will work normally when the player unit
is mounted within 10 degrees off the vertical plane at
the front panel. If the unit is tilted excessively, the disc
may not be loaded or unloaded properly.

CH4 Fader jack

CH3 Fader jack

3.5 mm stereo
mini cord

DN-X900

DN-D4500

CD1
Fader jack

3.5 mm stereo
mini cord

CD2
Fader jack

CH4 input jack

CH3 input jack

RCA Cord

RCA Cord

CD1 Output jack

CD2 Output jack

NOTE:
• Use a commercially available 3.5mm stereo mini cord for the Fader jack connections.

Advertising