Marantz CD5004 - Manual (Page 16)

12
Getting started
Basic connections
Basic operation
Specifi
cations
Index
Advanced connections
Advanced operations
Explanation of terms
Troubleshooting
ENGLISH
12
Getting started
Basic connections
Specifi
cations
Index
Advanced connections Advanced connections
Advanced operations
Explanation of terms
Troubleshooting
Basic operation
Advanced connections
Preparations
Connecting cables
Select the cables according to the equipment being connected.
Audio cables
Optical digital connections
Optical cable (sold separately)
Coaxial digital connections
Coaxial digital cable (sold separately)
Remote control connection
Remote connector cord (supplied)
Remote control connection
When you use this unit connected to a Marantz amplifi er, this unit
receives operation signals sent from the amplifi er and operates
accordingly.
n Connection
Use the supplied remote connection cable to connect the REMOTE
CONTROL IN terminal of this unit to REMOTE CONTROL OUT
terminal of the amplifi er.
n Setting
Set the remote control switch on the rear panel of this unit to
“EXTERNAL” to use this feature.
• This setting will disable remote sensor reception of this unit.
• To operate the unit, point the remote control at the remote
sensor of the amplifi er.
To use this unit without connecting it to the amplifi er, set the remote
control switch to “INTERNAL”.
Signal fl ow
Amplifi er
Remote connector cord (supplied)
Set to “EXTERNAL.”
Digital connections
AUDIO
OPTICAL
IN
COAXIAL
IN
CD recorder /
MD recorder
When connecting the optical digital output connector
with an optical transmission cable (sold separately)
Match the shapes then insert fi rmly.
The unit
1.CD5004U_ENG_0528.indd 12 1.CD5004U_ENG_0528.indd 12 2010/05/28 15:42:08 2010/05/28 15:42:08