Marantz CD5004 - Manual (Page 17)

13
ENGLISH
13
Advanced operations
Playing tracks in a specifi c order
(Program playback)
1 During stop mode, press [PROGRAM] .
• “Program” appears on the display and the program playback
mode starts.
• The “PROG” indicator fl ashes.
2 Use [NUMBER] (0 – 9) , [8, 9] or <8/6,
7/9> to select the tracks you want to program.
GExampleH
To program tracks 3 and 12 to be played in that order, press
[3] ,
[1] , and [2] one after the other.
3 Press 1 .
Playback starts in the programmed order.
The number you enter is set about 1.5 seconds after you press the
number buttons. To enter a two-digit number, be sure to press the
two number buttons, one immediately after the other.
Playback with unwanted tracks
skipped (Delete program playback)
1 After pressing [PROGRAM] during stop mode, press
[CANCEL] .
• “Delete Prog.” appears on the display and delete program
playback mode starts.
• “PROG” indicator fl ashes.
2 Use [NUMBER] (0 – 9) , [8, 9] or <8/6,
7/9> to select the tracks you want to skip.
GExampleH
To program tracks 3 and 12 to play in that order:
Press
[3] , [1] and [2] .
3 Press 1.
The selected tracks are skipped when the disc is played back.
The number you enter is set about 1.5 seconds after you press the
number buttons. To enter a two-digit number, be sure to press the
two number buttons, one immediately after the other.
Checking the order of the programmed tracks
Press [ SCROLL/RECALL ].
• During program playback:
Displays the track numbers in the programmed order.
• During delete program playback:
Displays the deleted track numbers in the deleted order.
Adding tracks for program playback
During playback or stop, press [PROGRAM] .
• When the “PROG” indicator fl ashes, select tracks that you want to
add for program playback.
Canceling a track from program playback
While stopped, press [ SCROLL/RECALL ].
Press [SCROLL/RECALL] to display the track that you want to delete
and press [CANCEL] .
Clearing the all programmed track
During program playback, press 2 twice.
During stop mode, press 2 once.
• You can specify up to 30 tracks each for program playback and
delete program playback.
• If you press [REPEAT] during program playback or delete program
playback, programmed tracks are repeatedly played in the selected
repeat mode (1-track repeat or all-track repeat).
• During 1-track repeat: The current track is played repeatedly.
• During all-track repeat: After the current session of program playback
ends, the tracks are played repeatedly from the fi rst programmed
track. This operation is repeated until you cancel the all-track repeat
mode.
NOTE
• Programmed playback is not possible with MP3 and WMA fi les.
• The program playback mode is canceled if you set power to standby,
turn off power, or open the disc tray.
Button located on both the main unit and
the remote control
BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control [BUTTON]
Symbols used to indicate buttons in this manual
1
<8 / 6> 3 2
<7 / 9>
3
[NUMBER]
(0 – 9)
[REPEAT]
[CANCEL]
[PROGRAM]
[DISPLAY]
[PITCH –, +]
[PITCH RESET]
1 2
[SOUND MODE]
[ENTER]
[SCROLL/RECALL]
[MENU]
[8 , 9]
1.CD5004U_ENG_0528.indd 13 1.CD5004U_ENG_0528.indd 13 2010/05/28 15:42:09 2010/05/28 15:42:09