Ofiles that can be played back – Marantz HD-DAC1 User Manual

Page 37

Advertising
background image

Connect and playback from a digital

device (COAX/OPT1/OPT2)

1

Press COAX, OPT1 or OPT2 to switch the input source

to “COAX”, “OPT1” or “OPT2”.

The digital audio signal that is being input is shown as follows in the

display.

“COAX

or

“OPT1

or

“OPT2

xxxxk”

xxxxk”

xxxxk”

(xxxx is the sampling frequency.)

0

If the sampling frequency cannot be detected, “Unlocked” will be

displayed.

0

“Unsupported” is displayed when audio signals that are not

supported by this unit are input.

o

Files that can be played back

See “D/A converter” (v p. 62).

NOTE

0 Do not input non-PCM signals, such as Dolby Digital, and DTS. This causes noise

and could damage the speakers.

0 If the sampling frequency switches, such as from A mode to B mode in a CS

broadcast, muting may operate for 1 – 2 seconds, cutting the sound.

Contents

Connections

Playback

Settings

Tips

Appendix

37

Front panel

Display

Rear panel

Remote

Index

Advertising