O no sound comes out, O sound is interrupted or noise occurs – Marantz HD-DAC1 User Manual
Page 55
o No sound comes out
Symptom
Cause / Solution
Page
No sound is produced. Or
sound is distorted.
0
Check the connections for all devices.
0
Insert connection cables all the way in.
－
0
Check that input connectors and output connectors are not reversely connected.
－
0
Check cables for damage.
－
0
Check the amplifier’s functions and controls and adjust as necessary.
－
0
Check that a proper input source is selected.
0
The volume is set to the minimum level. Adjust the volume to a suitable level.
0
Cancel the mute mode.
0
Switch “AMP Gain” to “Mid” or “High” if using headphones with high impedance or low sensitivity.
－
When the volume is
increased, sound from the
audio output connectors
(VARIABLE) is distorted.
0
If the “AMP Gain” setting is “High” or “Mid”, switch it to “Low”.
o Sound is interrupted or noise occurs
Symptom
Cause / Solution
Page
Sound is interrupted during
playback of tracks saved
on a computer.
0
Do not start applications other than the player software while playing music on your computer.
－
55