Marantz HD-DAC1 User Manual
Page 57
o USB memory devices cannot be played back
Symptom
Cause / Solution
Page
“No USB Device”, “Error 1”
or “Error 2” is displayed.
0
This unit may not recognize the USB memory device due to poor connection, etc. Make sure that the
connection is made properly by taking actions such as disconnecting and reconnecting the USB memory
device.
0
Mass storage class compatible USB memory devices are supported.
－
0
This unit does not support a connection through a USB hub. Connect the USB memory device directly to
the USB port.
－
0
The USB memory device must be formatted to FAT16 or FAT32.
－
0
Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.
When using a type of portable hard disc drive compatible with the USB connection that requires power
from an AC adapter, use the AC adapter that came with the drive.
－
Files on the USB memory
device are not displayed or
“Error 3” is displayed.
0
Files of a type not supported by this unit are not displayed.
0
This unit can display a file structure with up to 8 levels, up to 700 folders and up to 65,535 files in total.
Modify the folder structure of the USB memory device.
－
0
When multiple partitions exist on the USB memory device, only files on the first partition are displayed.
－
Files on a USB memory
device cannot be played.
0
Files are created in a format that is not supported by this unit. Check the formats supported by this unit.
0
Files that are copyright protected cannot be played on this unit.
－
0
If a file is unplayable, “Error 5” is displayed and the next file is played.
－
57