Connecting a pc or mac – Marantz NA8005 User Manual

Page 21

Advertising

Connecting a PC or Mac

By connecting a computer to the USB-DAC port on the rear panel of this unit using a commercially available USB connecting cable, this unit can be used

as a D/A converter. (v p. 68)

Type A

USB 2.0 cable

(Sold separately)

Type B

Computer on which the driver software and

audio player software are installed

0 Install the dedicated driver software on the computer to enable communication between the computer and this unit in order to playback high-resolution sound source (DSD

signal or 192 kHz/24 bit PCM signal) audio available on the internet. (v p. 68)

0 Download the driver software from the NA8005 page of the Marantz website.

NOTE

Use a cable that is 3 m or less to connect to the computer.