Marantz NA8005 - Manual (Page 73)

B Click the “Advanced” tab.
C Select the sampling rate and bit rate to be applied to the D/A
converter.
0
It is recommended that “2channel, 24 bit, 192000 HZ (Studio
Quality)” is selected.
D Click “Apply”.
E Click “Test”.
0
Check that audio from this unit is output from the PC.
.
Apply Cancel
Test
OK
2 channel, 24 bit, 192000 Hｚ (Studio Quality)
Give exclusive mode applications priority
Default Format
Select the sample rate and bit depth to be used when running
in shared mode.
Digital Audio Interface Properties
Allow applications to take exclusive control of this device
Apply
Restore Defaults Restore Defaults
General Supported Formats Levels Advanced
2 channel, 24 bit, 44100 Hｚ (Studio Quality)
2 channel, 24 bit, 48000 Hｚ (Studio Quality)
2 channel, 24 bit, 96000 Hｚ (Studio Quality)
2 channel, 24 bit, 192000 Hｚ (Studio Quality)
w
e
r
t
NOTE
0 The dedicated driver must be installed in the PC before this unit is connected to a
PC. Operation will not occur correctly if connected to the PC before the dedicated
driver has been installed. Moreover, if the PC is running Windows XP as its OS,
the PC’s speed will decrease significantly, and a PC restart may be required.
0 Operation may fail in some PC hardware and software configurations.
Contents Connections Playback Settings Tips Appendix
73 Front panel Rear panel
Remote control
unit
Index