Names and functions, 6front panel – Marantz SA-11S1 User Manual
z POWER ON/OFF switch
This switch is used to turn the power ON and OFF. When
it is pressed, the display window lights up, and the power
comes on. When it is pressed again, the display window is
extinguished, and the power goes off.
x Disc tray
The disc to be played is placed on the tray.
* Close the tray by pressing the operation button, not by
pressing it in with your hand.
c Remote sensor
The infrared control signal emitted from the remote control
unit are sensed here.
This screen shows the operating status.
Press this button to select the Super Audio CD sound mode.
Super Audio CD (stereo) or Audio CD (if discs are sup-
ported) (See page 13)
(Track Skip/Search buttons)
These buttons can be used as both track skip and track
search buttons. (The buttons on the main unit only.)
: Each time this button is pressed, the track being
played is skipped forward. When this button is
held down, tracks are searched forward (Fast
: When this button is pressed, the unit goes back
to the beginning of the current track. If the button
is pressed more times, the track being played
is skipped back. When this button is held down,
tracks are searched backward (Fast Rewind).
In program play, Fast Forward and Fast Rewind can be
done in the playing track only.
Press this button to pause playback. If pressed again, the
unit returns to playback.
Holding down this button for two or more seconds while a
track is stopped starts LCD Contrast Adjustment mode.
(See page 20)
Press this button to stop playback. Also this button is used
to clear all programs.
Press this button to start playback.
Press this button to open the tray. Put on a disk label side
up. Press the button again to close the tray.
⁄1 DISPLAY OFF indicator
This indicator turns on when the LCD screen is turned off
⁄2 Illumination lamp
This lamp lights when the display window lights.
This lamp may always remain off for certain settings. (See
SUPER AUDIO CD PLAYER SA-11S1
b Ú1 c
z x v
NAMES AND FUNCTIONS