Operation – Marantz SA-11S1 User Manual

Page 25

Advertising
background image

ENGLISH

20

CHANGING THE TEXT BRIGHTNESS ON
THE LCD (LCD CONTRAST ADJUSTMENT)

Changing procedure (Changes can be made from the main
unit when operation is stopped.)
q If playback is in progress, press the

STOP

button to stop

playback.

w Hold down the

PAUSE

button on the main unit for at

least two seconds. (This operation does not work on the
remote control.)
After holding down the button for two seconds, the current
contrast value is displayed. Within two seconds while it is
displayed, press the

button to increase the

contrast, or press the

button to reduce the contrast.

Changes can be made to the contrast level over the entire
range (+8 to -8).
If the

or

button is not pressed within two

seconds, the contrast is automatically set to the currently
displayed level.
Display example: Contrast +-0

e Pressing the

STOP

button while changing the setting

returns to the default setting (+-0).

* Any changes made to the LCD contrast setting are retained

even when the power is turned off.

* The range of the LCD contrast setting is preset to be small.

TURNING OFF THE DISPLAY AND
ILLUMINATION (DISPLAY OPERATION)

This function is used to turn the LCD and illumination lamps
(blue) on and off. (Two display statuses are available.)

1. Mode where LCD and illumination lamp (blue) turn on

Each time the

DISPLAY

button is pressed during playback,

the LCD and illumination lamp (blue) switch on and off.
When Display Off is set, the Display Off indicator (red) lights
up.
* When any related button is pressed (such as when the

OPEN/CLOSE

button,

STOP

button, or

button is

used), the display is automatically turned on, but the
Display Off indicator (red) remains lit. If a track is started
in this state, the display is automatically turned off two
seconds later.

* When a track is stopped, the Display Off indicator (red)

and illumination lamp (blue) light up alternately.

2. Setting for turning on only LCD (illumination lamp (blue)

remains off)
In the default state, the illumination lamp (blue) is lit. In this
state, the illumination lamp (blue) remains off regardless
of whether the LCD is turned on or off.

Changing procedure (Changes can be made when
operation is stopped.)

q If playback is in progress, press the

STOP

button to stop

playback. To make the setting, hold down the

DISPLAY

button for at least two seconds from the remote control
(RC-11SAS1).

w If the illumination lamp (blue) is lit, it is turned off and is set

off. To change the setting from off to on, hold down the
same operation

DISPLAY

button for at least two seconds

to turn on.

* The illumination lamp (blue) off setting is retained even when

the power is turned off, and this setting remains until the
setting is changed to the on setting.

* The LCD display on/off setting is not retained when the power

is turned off. (This enables you to enjoy operation each time
you use it.)

OPERATION

Advertising
This manual is related to the following products: