Marantz SA-11S1 - Manual (Page 18)

ENGLISH
13
To start playback form the first track
Press PLAY button.
To stop playback
Press STOP button.
To eject disc
Press OPEN/CLOSE button to open the disc tray and take the
disc off. Press the button again to close the tray.
Disc tray must be closed when the unit is not be used.
To pause playback
Press PAUSE button.
PAUSE indicator will light and playback is paused at the point
that the button is pressed. To restart playback, press
PAUSE
button again or press PLAY button.
To change time display
Press the TIME button on the remote control.
Each time TIME button is pressed, display will change in the
following order. “Track elapsed time” → “Track remaining time”
→ “Total remaining time” → “Track elapsed time”.
• Track remaining time
(The remaining playing time from the playing point to
the end of the current track)
• Total remaining time
(The remaining playing time from the playing point to
the end of the last track)
* If TIME button is pressed when Super Audio CD disc that
supports text is in use, time display is given priority and the
text information will not be displayed afterward. To see the
text information, press
TEXT
button.
7 Switching Sound Mode (Super Audio
CD)
PAUSE
STOP
PLAY OPEN/
SOUND POWER ON/OFF
SUPER AUDIO CD PLAYER SA-11S1 CLOSE
MODE
DISPLAY OFF
q Press
SOUND MODE button in stop mode (not
playing).
The currently selected layer or area is shown on the LCD.
(CD or Super Audio CD)
If
SOUND MODE button is pressed again, a playable layer or
area will be shown, and the layer or area will be switched
to new one.
* When layer or area is switched, TOC will be read again.
* The sound mode cannot be changed for Audio CDs and
discs with only a Super Audio CD area.
* The sound mode on hybrid layer discs will be changed in
the following order.
Super Audio CD stereo area
→ CD layer → Super Audio
CD stereo area
* Sound mode can be selected while the tray is open. Select
a desired layer or area and press PLAY button then
the tray will close and playback will be started.
w Press the
SOUND MODE button during playback.
The currently selected layer or area is shown on the LCD.
(CD or Super Audio CD)
If
SOUND MODE button is pressed again, the playback is
stopped, and the layer or area will be switched to new one.
When you want to listen at that area, press
PLAY button
again. The playback will be started.
START SOUND MODE
When a Super Audio CD hybrid layer discs that has both a
Super Audio CD high sound quality stereo area and an Audio
CD area information are to be played, this player makes it
possible to set the layer/area (Super Audio CD or Audio CD)
to be preferentially played.
This setting can be made when the tray is closed and there is
no disc in the disc tray.
q Press
SOUND MODE button on the player.
The currently selected layer/area is displayed.
If the Super Audio CD is selected
: Super Audio CD
If the Audio CD is selected : CD
w Press the
SOUND MODE button again to display the layer/
area to be played first, and then leave the setting for at
least two seconds to register the setting for the start sound
mode.
Caution
* Start sound mode has a memory retention function where
the settings remain stored and unchanged even when the
disc is changed or the power is turned off.
* At the time of shipment, the sound mode is set to Super
Audio CD.
“–” is displayed
“REMAIN”
is displayed
“–” is displayed
“TOTAL REMAIN”
is displayed
SOUND MODE Button
OPERATION