Marantz MOUNT20BL - Manual (Page 4)

MOUNT20 PROJECTOR MOUNT INSTALLATION INSTRUCTIONS continued
Step 4 B
Figure 7
Figure 8
100 Corporate Drive
Mahwah , NJ 07430
Phone: 201 762-6500
You can find your nearest authorized distributor or dealer
on our website at: www.marantz.com
Printed in Canada 2008
Work in a group of 2 or more to carry the projector and follow
manufacturer's guidelines for relocating as stated in the VP-12SX
owner's manual.
Lift and slide the projector onto the 6 (mm) screws previously
installed in the metal studs of the plate on the ceiling (see arrow
in Figure 7). Tighten the 6 (mm) screws on both sides of the
mount and install four (4) 6 (mm) screws and washers into the
side of the projector Mounting Plate 4.
Projector Mounting Plate 4 (continued) Projector Mounting Plate 4 connected to Mounting Plate 3
Sequence of Assembly of Projector Mounting Plates
Plate 3
Plate 2
Plate 1
Plate 4
20 0 Tilt
20 0 Tilt
Projector Side
Mount Side
Step 2
Step 3
Step 4
Mounts Fully Assembled
Ceiling Side
Projector Side
Plate 4
CEILING