Mathey Dearman CGM Cold Cutting System - Manual (Page 30)

30
TABLE 1 – CGM BODY (part 3)
Item
N°
Description
Drawing
REF. N°
Part Number
131A Bronze Bushing 05-5500-131A
132A Washer, modified 05-5500-132A
133A Nut , Castellated 05-5500-133A
134A CGM Frame, Modified 05-5500-134A
137 Hardened pin, 8 x 20mm 05-5500-137
138 --------------- ------ ---------------
178 Serial Plate 05-5500-178
179 Plate, Direction Up and Down 05-5500-179
180A Wrench, Blade Height Adjustment 05-5500-180A
401 Allen Head countersunk Screw, M6 x 13 05-5500-401
402 Allen Head Cap Screw, M8 x 19 05-5500-402
403 Allen Head Cap Screw 05-5500-403
404 Ring Flange 05-5500-404
405 Ring Nut 05-5500-405
406 Spider Locking Washer 05-5500-406
407 Drive Ring 05-5500-407
408 Allen Head Cap Screw 05-5500-408
409 Washer, Locking 05-5500-409
410 Spacer, Transmission 05-5500-410
411 Washer, locking 05-5500-411
412 Hex Head Cap Screw 05-5500-412
426 Collar 05.5500.426
427 Sinterized Bushing 05-5500-427
428 Idler pinion 05-5500-428
451 4 Mesh Sprocket with Shaft 05-5500-451