Measurement Computing ADAC-LVi - Manual (Page 190)

Chapter 2 Range Config Library
ADAC LabVIEW VI 184
$'$& 6HW 'DWD 2IIVHW FRQ¶W
Device Handle (0) Device Handle is a numeric value that is used to identify the device
subsystem. The default Device Handle is 0.
DATA OFFSET (BIPOLAR:0) DATA OFFSET is a numeric value that sets the
hardware data offset configuration of the device.
The available options are:
0:BIPOLAR Bipolardata +/- V
1:UNIPOLAR Unipolar data 0-V
The default DATA OFFSET is 0:BIPOLAR
error in (no error) Error in describes error conditions occurring before this VI executes.
This cluster defaults to no error.
Device Handle out Device Handle out contains the value of Device Handle in.
error out Error out contains error information. If the error in cluster indicated an error,
the error out cluster contains the same information. Otherwise, error out describes the
error status of this VI.
ADAC Get Data Offset
This VI gets the hardware data offset of the device. See the AL_SetDataOffset.VI for the
available options.
Device Handle (0) Device Handle is a numeric value that is used to identify the device
subsystem. The default Device Handle is 0.
error in (no error) Error in describes error conditions occurring before this VI executes.
This cluster defaults to no error.
Device Handle out Device Handle out contains the value of Device Handle in.