Nevion FR202 - Manual (Page 20)

FR-2RU-20-2 Rev. A
nevion.com | 20
Figure 22: Inserting module cards (continued)
Slide the card into the plastic guide rails inside the frame by pushing at the card edge until
the rear edge of the card is locked by the card lock at the end of the card rail. Then push
the card handle into vertical position. See sketches below for detailed description.
Figure 23: Inserting module cards (continued)
Make sure that the connector on the module card fits with the connector on the back plane
card when inserting a new module card for the first time.
It should not be necessary to use any force when entering the module card into
the accompanying back plane connector.
Card locking clip