Nevion ETH1000-SW-COM - Manual (Page 2)

Contents
1 Nevion Support 4
2 Revision History 5
3 Product overview 6
3.1 Key features 6
4 Specifications 7
4.1 General 7
4.2 Optical input 7
4.3 Optical output 7
4.4 Electrical Ethernet port 7
4.5 Configurable serial data port 8
4.6 Serial data port 8
4.7 GPI inputs 8
4.8 GPI outupts 9
5 Connector modules 10
5.1 ETH1000-SW-COM-C1 10
5.2 Connector pin description. 11
6 Configuration 12
6.1 DIP switches 12
6.2 Multicon GYDA override 13
6.3 Default configuration 13
6.4 Group of cards 13
6.5 In-band management 14
6.5.1 Setting local IP configuration on remote card. 15
6.5.1.1 Temporary move card to local frame. 15
6.5.1.2 Have card in remote frame. 15
6.5.2 Multicon GYDA hot-swap procedure 15
6.6 UART matrix 16
6.7 Network configurations 16
6.8 Restore to factory default image 16
7 Operation 17