Nevion AV-3G-XMUX - Manual (Page 18)

Configuration 18
AV-3G-XMUX User Manual Rev. B
6.1.1 AES direction/destination selection
The 1st switch in each set of 4 controls two things:
1. The direction for 2 AES ports
2. The routing destination for the 3 switches.
Up or on means:
• The AES ports are inputs.
• The routing selects the source for an embedder group.
Down or off means:
• That the AES ports are outputs.
• The routing selects the source for AES outputs.
For Example: When SW1 switch 1 is ON:
• The module will embed into group 1 and AES 1&2 are inputs.
• The next three switches 2, 3 and 4 control which source will be embedded into group 1.
If SW1 switch 1 is OFF:
• The module will NOT embed group 1 and AES 1&2 are outputs.
• The next three switches 2, 3 and 4 control which source will be routed to AES outputs
1&2.
This pattern applies to all the switches of SW1 and SW2.
Table 6.1 SW1
1 2-4 route to 5 6-8 route to
ON Emb Group 1 ON Emb Group 2
OFF AES 1&2 OFF AES 3&4
Table 6.2 SW2
1 2-4 route to 5 6-8 route to
ON Emb Group 3 ON Emb Group 4
OFF AES 5&6 OFF AES 7&8
Switches 1 and 5 control two things. The tables show how they effect the next two switches