Nevion AV-3G-XMUX - Manual (Page 36)

LEDs 36
AV-3G-XMUX User Manual Rev. B
8 LEDs
The module has four LEDs.
8.1 Status LED
This turns red for 1 second when power is applied and then turns green when the FPGA code has
loaded correctly.
The LED is green
• the module is programmed and functioning normally.
The LED is orange
• the module is not programmed
The LED is red
• there is something wrong with the module power supply levels OR
• the FPGA code has not loaded correctly OR
• The laser output is not active (failed or killed)
8.2 SDT Input LED
The LED is green
• the SDI signal is received correctly with the optical input
The LED is orange
• the SDI signal is received correctly with the electrical input
The LED is red
• there is no input or the module is unable to lock to the signal.
8.3 AES LEDs
The function of the next two LEDs is determined by the position of DIP SW3.2.
On (De-embed mode)
• The LEDs show the presence of audio groups in the received video signal