Nevion AV-3G-XMUX - Manual (Page 32)

Configuration 32
AV-3G-XMUX User Manual Rev. B
6.4.9.4 De-embedding
The audio channel with the ’data signal to be de-embedded’ must be configured by GYDA as
there may be several data channels available. The AV-3G-XMUX will automatically detect the
data channel format when present and output the data on the backplane connector. The output
driver will only be active when data is output in UART mode i.e. RS485. The output is always
active when raw data mode is used.
6.4.9.5 Limitations
The normal UART mode checks the data when receiving and only embeds valid bytes. The data
format must be correct. This also means that a BREAK condition of many spaces will not be de-
tected or transmitted. Contact support if this is a requirement.