Nevion 3GHD-OE-L-2-SFP - Manual (Page 15)

3GHD-OE-L-2-SFP Rev. C
nevion.com | 15
Table 5 Dual mode
Switch # Label Function, DIP=OFF Function, DIP=ON Comment
1 EQ1 Not used
2 EQ2 Not used
3 Not used
4 Latch Latched Non-latched Select if changeover
is latched or non-
latched
5 Main Optical input 1 is
main Optical input 2 is main
Select’s main input to
changeover
6 Level
LED’s normal
operation
All LED
’s showing
optical input power
DOP
See Table 6
Displaying optical
input power
7 Port Optical input 1 Optical input 2 Selects which optical
input to be used for
dip 7/DOP
8 OVR GYDA control.
Configuration with
GYDA Override GYDA
control. Configuration
with DIP switch Select configuration
from GYDA
9 RCL1 Reclocker 1 bypass Reclocker 1 enabled Sets reclocker mode
for output 1
10 CHO1 Change over
disabled Change over enabled Enables change over
for output 1
11 SEL1 Optical input 1 Optical input 2 This setting are
overridden if DIP 10
(CHO1) is enabled
12 Not used
13 RCL2 Reclocker 2 bypass Reclocker 2 enabled Sets reclocker mode
for output 2
14 CHO2 Change over
disabled Change over enabled Enables change over
for output 2
15 SEL2 Optical input 1 Optical input 2 This setting are
overridden if DIP 14
(CHO2) is enabled
16 Not used
All DIP switches are off when pointing towards the release handle.