Nevion 3GHD-OE-L-2-SFP - Manual (Page 8)

3GHD-OE-L-2-SFP Rev. C
nevion.com | 8
3.2 Different hardware version
3GHD-OE-L(-2)-SFP is produced in two different hardware version, version 1.0 and version
1.1. The two version can be identified either by looking in Multicon Gyda at the config page
for the card, see Figure 5 HW id in Multicon Gyda or by looking at the card. If the card has
one configuration DIP it is HW id is 1.0. And if the card has two configurations DIP it is HW
id 1.1.
Figure 5 HW id in Multicon Gyda
3.3 Locally configuration for hardware ID 1.0
The 3GHD-OE-L-2-SFP can support a number of different broadcast formats. The correct
configuration can either be set with a DIP switch or with the GYDA Control System. The
layout is shown in the drawing below with the DIP switch to the upper left position.
Figure 6 3GHD-OE-L-2-SFP board layout HW ID 1.0