Nevion 3GHD-OE-L-2-SFP - Manual (Page 21)

3GHD-OE-L-2-SFP Rev. C
nevion.com | 21
4
Connections
The 3GHD-OE-L-2-SFP has a dedicated connector module; 3GHD-EO-2-C1. This module is
mounted at the rear of the sub-rack. The module is shown in the figure below.
Figure 21 Connector module for 3GHD-OE-L-2-SFP
Figure 22: Fiber connection
4.1 Mounting the connector module
The details of how the connector module is mounted, is found in the user manual for the sub-
rack frame FR-2RU-10-2.
This manual is also available from our web site: http://www.nevion.com
4.2 Terminal format support
The different input and output ports on 3GHD-OE-L-2-SFP can support a number of formats.
The table below show which signal formats are supported on the selected terminals.
Unused inputs should be terminated to avoid alarms triggered by noise.