NIStune Type 3 User Manual

Page 2

background image

Type 3 Hardware Installation Manual

Page 1 of 12


Welcome to Nistune.

The Nistune hardware and software solution provides a means for the car enthusiast to retune their vehicle
whilst retaining their factory ECU and its default programming.

This solution provides many advantages over aftermarket ECUs in that the

• Factory default tuning is maintained once the Nistune board is installed. Upon installation of the board,

vehicle will be operational as usual.

• Additional tuning can then be made against the factory maps for modifications made to the vehicle.

There is no need to tune the car to get it running from scratch, reducing time and costs of tuning
required on dyno.

• There is no need for wiring loom modifications.

Nistune provides realtime tuning and maptracing. It provides the ability to make changes on the fly to the
factory ECU and then the desired results are achieved, save these permanently in non-volatile memory on the
programmable board.

Nistune also provides data logging and playback facilities using the Nissan Consult Port. Consult interfaces are
purchased separately. Nistune software also provides a user friendly responsive graphical interface to perform

Contained in this manual are the instructions for installing a Nistune board into the Mitsubishi 7700 series
consult enabled series of ECUs.