Norsat O3b 5W BUC - Manual (Page 18)

Rev. 1.0
7005STC-O3B Series
DES007565
18
5.2.2 Serial Commands List
Table 2. Serial Commands List
Item Command Example Explanation
1 gst gst Get BUC status
2 sspaon sspaon Turn on SSPA
3 sspaoff sspaoff Turn off SSPA
4 sendipwr sendipwr 192 168 100 3 Write master(PC) ip
5 sendiprd sendiprd Read master ip
6 sendportwr Sendportwr 4001 Write master port
7 sendportrd sendportrd Read master port
8 ipwr ipwr 192 168 100 15 Write BUC ip
9 iprd iprd Read BUC ip
10 portwr portwr 4001 Write BUC port
11 portrd portrd Read BUC port
12 gwwr gwwr 192 168 100 1 Write BUC gateway
13 gwrd gwrd Read BUC gateway
14 macwr macwr 00 11 22 33 44 55 Write BUC MAC address
15 macrd macrd Read BUC MAC address
16 smwr smwr 255 255 255 0 Write subnet mask
17 smrd smwr Read subnet mask
5.2.3 Serial Mode Operation
For serial mode operation, connect a prepared RS232 cable between the MS 12-pin connector on
the BUC and the PC serial port as shown in Fig. 11. Refer to Table1 and Fig. 4 for RS232
connection.
Figure 11. RS 232 connection between BUC and PC