Nortec MLP RO pump station - Manual (Page 8)

TI071GB-02 /06.11.09/LJ 8/12
Further indications
In the F1 area - Humidity
Indication in
display Explanation Range Standard
SP1 xx %RH The desired humidity of the section concerned 0-MAX.SP 50
SP2 xx %RH The desired humidity of the section concerned 0-MAX.SP 50
SP3 xx %RH The desired humidity of the section concerned 0-MAX.SP 50
SP4 xx %RH The desired humidity of the section concerned 0-MAX.SP 50
Note: SP x = 0 describes that FLU (see description under the F7 range) is put out of operation.
In the F2 area - Hour meters
Indication in display Explanation Range Standard
SECT. 1 x.x HOUR Indication of the time humidified in
the individual section
SECT. 2 x.x HOUR Indication of the time humidified in
the individual section
SECT. 3 x.x HOUR Indication of the time humidified in
the individual section
SECT. 4 x.x HOUR Indication of the time humidified in
the individual section
PUMP x.x HOUR Indication of the total operating time
of the pump.
PUMP RO x.x HOUR Indication of the total operating time
of the RO pump.
In the F3 range - Indication of pump temperature
Indication in display Explanation Range Standard
MLPRO > 500
PUMP TEMP xxxx °C
Indication of the pump working
temperature in
°C