Ethernet communication module dvpen01-sl, 1 introduction, 1 functions – Delta DVPEN01-SL User Manual

Page 5: 2 specifications

Advertising
background image

Ethernet Communication Module DVPEN01-SL

DVP-PLC Operation Manual

3

1 Introduction

Thank you for choosing DVPEN01-SL module. To correctly install and operate DVPEN01-SL, please read

the manual carefully before using the module.

DVPEN01-SL is an Ethernet communication module for remote setting and communication through

WPLSoft. DVPEN01-SL is able to send E-mails, automatically correct the RTC in DVP28SV11R/T and

exchange data. It supports Modbus TCP communication protocol and can conduct remote monitoring by using

SCADA (Supervisor Control and Data Acquisition) software or HMI (Human Machine Interfaces). DVPEN01-SL

can be the master of Modbus TCP, sending out Modbus TCP instructions and controlling the peripheral

equipment. In addition, under MDI/MDI-X auto-detection, it does not need to use a crossing cable. See the

contents below for more detailed instructions on DVPEN01-SL module.

1.1 Functions

z

Auto-detects 10/100Mbps transmission speed

z

MDI/MDI-X

auto-detection

z

Supports Modbus TCP protocol (at the same time supports Master and Slave mode)

z

Able to send out E-mails

z

Auto-corrects the RTC in PLC through the Internet time correction function

z

Supports point-to-point data exchange (Max. data exchange length: 200 bytes)

1.2 Specifications

ƒ

Internet interface

Item

Specification

Interface RJ-45

with

Auto

MDI/MDIX

Number of ports

1 Port

Transmission method

IEEE802.3, IEEE802.3u

Transmission cable

Category 5e

Transmission speed

10/100 Mbps Auto-Detect

Network protocol

ICMP, IP, TCP, UDP, DHCP, SMTP, NTP, Modbus TCP

ƒ

Serial communication interface

Item

Specification

Interface RS-232

Number of ports

1 Port

Transmission cable

DVPACAB230, DVPACAB215, DVPACAB2A30, DVPACAB2B10

ƒ

Environment

Item

Specification

Noise immunity

ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge
EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV
Analog & Communication I/O: 1KV
Damped-Oscillatory Wave: Power Line: 1KV
RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m

Environment

Operation: 0°C ~ 55°C (temperature), 50 ~ 95% (humidity), Pollution degree 2;

Advertising