OpenEye Gen6 RADIUS-PC - Manual (Page 33)

34 32541AD
Action on Failure
1. Click Menu and then click Settings .
2. Click Health Check Setup .
3. Set up the Health Check options ( Pop up on Failure , Pop up on Warning , Voice Warning on
Failure ).
4. If you select the Voice Warning on Failure check box, find and test the wav file you will use.
a) Click the folder button to browse for a .wav file.
b) Click the speaker button to test the .wav file.
5. Continue by completing the steps required in the Servers tab.
The Servers tab allows you to choose which servers are included on your health check.
1. Select the appropriate recorders in the Server Name list.
2. Type or use the Up or Down arrows to change the port.
Note Set your Health Check port to match the port used by your recorder. OpenEye Professional
Recorders (X-Series, N-Series, and H-Series) use port 2005. E-Series recorders use port 0.
3. To add Predefined Text options, type your note into the Predefined Text field, and then click Add .
Note Adding Predefined Text terms to your health check setup allows you to assign predetermined
health check status memos when running a health check, such as scheduled recorder restart,
camera maintenance, power outage, or suspected theft.
4. Click Update to save your changes to the Predefined Text list.
5. Click Save and Close to exit Health Check Setup.
Server Name list
Port Number
Text entry box
Alarm confirm
tag list