OpenEye D4000 - Manual (Page 15)

30564AA 15
Buttons
Return to the Home Screen
When connecting to a PoE IP Camera, press the PSE button to turn
the tester into a PoE Power Source. When enabled the PSE button
will light up, and the tester will provide power to the camera from the
tester’s internal battery.
Return to the previous page
Enter/Save
AV In: Displays the video from the BNC Video In
AV Out: Select a video output mode; includes video pass through
and several video test patterns.
Enters the IP camera menu.
Cable tester. Use this when testing CAT5, CAT5e or CAT6 cable.
Select PoE power use options
Setup