OpenEye D4000 - Manual (Page 16)

16
MENU
ANALOG VIDEO IN/OUT
AV In
Connect the video source to the D4000 using the BNC input on the tester. Press the AV In
button on the main menu screen to enter the live view.
When connecting to a PTZ camera, you can control the camera through this screen. Connect
the RS-485 control wires to the T- and T+ on the tester. Make sure that the PTZ control is
properly configured in the Dome Setup screen. Go to Setup > Dome Setup to enable and
configure RS-485.
See Dome Setup for more information.