Orion System OE392-10 System Manager TS - Manual (Page 78)

Index B
SMTS Technical Guide 78
V
VCB-X Setpoints, continued
Fan Starting Delay..........45
Head Pressure Setpoint..........46
Heat/Cool Changeover Delay..........45
Heating High Reset Source..........42
Heating Low Reset Source..........42
Heating Minimum Fan VFD Signal..........42
Heating Minimum Run Time..........45
Heating Min Off Time..........45
Heating Mode Enable..........40
Heating Outdoor Air Lockout..........42
Heating Reset Source High Limit..........42
Heating Safety Cutoff Temperature..........42
Heating Stage Down..........45
Heating Stage Up..........45
Heating Staging Off Deadband..........42
Heating Staging Window..........42
Heat Mode Maximum Fan VFD Signal..........43
Heat Pump Aux Heat Delay..........45
Heat Pump Defrost Adaptive Timer..........46
Heat Pump Defrost Interval..........46
Heat Pump OAT Lockout..........42
Heat Wheel Defrost Temperature..........41
Hood On MUA Cooling Setpoint..........40
Hood On MUA Heating Setpoint..........40
Humidity High Reset Limit..........46
Humidity Low Reset Limit..........46
IAQ Altitude {For CO
2
Sensor}..........43
IAQ Maximum CO
2
Setpoint..........43
IAQ Minimum CO
2
Setpoint..........43
Indoor Humidity High Reset Limit..........46
Indoor Humidity Low Reset Limit..........46
Low Ambient Temperature..........40
Main Fan Maximum Fan VFD Speed..........43
Main Fan Maximum VFD Voltage..........47
Main Fan Minimum VFD Voltage..........47
Max Economizer in Heating Mode..........43
Mechanical Heat/Cool Alarm Timer..........45
Minimum Outdoor CFM..........43
Miscellaneous Setpoints..........46
Mod Cooling Proportional Window..........41
Mod Cooling Time Period..........45
Mod Cool Signal High Volts..........47
Mod Cool Signal Low Volts..........47
Mode Selection Deadband..........40
Mod Heating Proportional Window..........42
Mod Heating Time Period..........45
Mod Heating Unoccupied Position..........42
Mod Heat Signal High Volts..........47
Mod Heat Signal Low Volts..........47
MUA Outdoor Air Dewpoint Setpoint..........40
Outdoor CFM Deadband..........43
Outdoor Sensor Calibration Offset..........48
Outputs Setpoints..........48
Outside CFM Area..........44
Pre-Heat Enable Temperature..........40
Push Button Override Duration..........46
Re-Heat Head Pressure Setpoint..........46
Reset Source Low Limit..........42
Return CFM Area..........44
Return Sensor Calibration Offset..........48
Space Sensor Calibration Offset..........47
Static/Fan Speed Control Rate..........45
Static Pressure Setpoint..........43
Static Setpoint Deadband..........43
Supply Air Cooling High Reset Limit..........41
Supply Air Cooling Reset..........41
Supply Air Heating Reset..........42
Supply Air Heating Setpoint..........42
Supply CFM Area..........44
Supply Sensor Calibration Offset..........47
Supply Setpoint Reset Interval Rate..........42
Supply Setpoint Reset Loop Rate..........42
Trendlog Interval..........46
Unoccupied Cooling Offset..........40
Unoccupied Heating Offset..........40
Vent Mode Minimum Fan VFD Signal..........43
Warmup Mode Timeout Period..........46
Warmup Target Temperature..........40
Vent Mode Minimum Fan VFD Signal - VCB-X..........43
Viewing Alarm Status..........22
Viewing and Setting Holidays..........23
Viewing and Setting Schedules..........23
Viewing VCB-X Alarm Status..........22
View Status Only..........14
Voting Zone on Zoned Systems..........52