OWON AG1022 - Manual (Page 27)

5.Front Panel Operation
Parameter 1
DC Voltage
Figure 5-12: The DC Setting Interface
To recall wave file
This function can read the waveform file with suffix of (*.ota) which is cut from SDS series
oscilloscope manufactured by OWON and saved to U disk or cut by the software of
OWON oscilloscope. Then the waveform generator can output the same signal as the cut
wave.
Use SDS Series oscilloscope manufactured by OWON to cut wave:
(1)
Connect U-disk to SDS series oscilloscope.
(2)
Press Save to call out the save menu.
(3)
Press the H1 button, the Type menu will display at the left of the screen, turn the M
knob to choose Cut Wave for type.
(4)
Move cursor1 and cursor2 to choose the range of wave to be cut.
(5)
Press the H2 button, and the input keyboard will pop up. The default name is the
current system date. Turn M knob to choose the keys, and press M knob to input the
chosen keys. Choose and press Enter key of the keyboard to end the input and store
the file with the current name to U-disk.
22