OWON AG1022 - Manual (Page 33)

5.Front Panel Operation
confirm. All the settings will be set to default. The default settings of the system are as
follows:
Output Default
Function Sine Wave
Frequency 1kHz
Amplitude/Offset 1 Vpp / 0 Vdc
Waveforms Default
Frequency 1kHz
Amplitude
1Vpp
Offset
0Vdc
Duty Cycle of Square 50%
Symmetry of Ramp 50%
Pulse Width of Pulse 200us
Duty Cycle of Pulse 20%
Others Default
Brightness
95%
Separator Comma
Screen Saver time 100 minutes
Baud Rate 115.2K
Load High Z
Phase Deviation 0°
Clock Source Internal
Channel Output Control Off
To Set the Beep
(1)
Press Utility and choose System, enter the second page of the menu.
(2)
Press F1 to select Beep.
(3)
Press F1 to switch between On/Off. On is to activate the sound when the system
informs you. Off is to deactivate it.
View System Information
(1)
Press Utility and choose System, enter the second page of the menu.
(2)
Press F2 to select Sys info. You can view the Version and Serial number.
28